Shop Our Online Store

Honeycomb Bases

Toggle Hooks

World-renowned, Best system on the market

- Redesigned to insure longer life
- State of the art heat treat procedures to eliminate cracking
- Made in the USA

Overview:

Sterling Toggle's world-renowned plate mounting system is known as the industry's standard for locking and registering embossing and foil stamping dies into position.

Finishing specialists appreciate the ease and convenience of obtaining hairline die registration using toggle hooks. The combined forward and downward travel of the toggle hook locks the die firmly into place. A ten-degree bevel is required along the perimeter of the die.

Toggle hooks (Aka Die Fixings, Die Catchers, Die Locking ) are manufactured in our factory in the USA and conform to the highest quality standards.
All sizes are stocked.

Standard Size - Used with honeycomb chases with a thickness of .668" - .759" (17mm -19.28mm)
Low Height Size - Used with honeycomb chases with a thickness of .540" - .668" (13.71mm -17mm)


Standard Hooks Low Height Hooks Description
Image Image Number 0 Toggle Hooks
Narrow Margin Hook used when less than 1/8" (3mm) margin is required

Standard:  Part #100-100
Low Height: Part #300-350
Image Image Number 1 Toggle Hooks
Standard Register Hook can be used most of the time

Standard:  Part #100-101
Low Height: Part #300-351
Image Image Number 2 Toggle Hooks
Register Hook - has a jaw width slightly larger than the No.1 hook, it's our second most popular hook

Standard:  Part #100-102
Low Height: Part #300-352
Image Image Number 3 Toggle Hooks
The No.3 is the same size as the No.1 hook except that the jaw thickness overall height is approximately .040" (1mm) smaller

Standard:  Part #100-103
Image Image Number 3E Toggle Hooks
Extended Jaw Register - This hook has a jaw length that is in between our No.2 and No.4 hook

Standard:  Part #100-104
Low Height: Part #300-354
Image Image Number 4 Toggle Hooks
Extra Extended Hook - Used for locking up dies on honeycomb bases that do not use our standard hole pattern, such as a heated honeycomb base.

Standard:  Part #100-105
Low Height: Part #300-355
Image Image Toggle Hook Bodies Only

Standard # 0:  Part #100-112     Low Height # 0: Part #300-356
Standard # 1:  Part #100-113     Low Height # 1: Part #300-357
Standard # 2:  Part #100-114     Low Height # 2: Part #300-358
Standard # 3:  Part #100-115
Standard #3E:  Part #100-116     Low Height #3E: Part #300-359
Standard # 4:  Part #100-117     Low Height # 4: Part #300-360
Image Image Toggle Hook Assembly
These parts can be used as replacements, they fit both standard and low Height Hooks

A: Back Latch : Part #100-107
B: Pin : Part #200-202
C: Bottom Latch : Part #100-106
D: Toggle Screw : Part #100-108 (Fits all size hooks except #0 Hooks)
E: Toggle Screw : Part #300-313 (Fits only #0 hooks)