Toggle Hooks

Manufactured in the USA

Sterling Toggle hooks are used in our honeycomb plate mounting system and are the industry's standard for locking and registering embossing and foil stamping dies into position.

Finishing specialists appreciate the ease and convenience of obtaining hairline die registration using toggle hooks. The combined forward and downward travel of the toggle hook locks the die firmly into place. A ten-degree bevel is required along the perimeter of the die.

All components of the Toggle Hook are manufactured and assembled in West Babylon, NY.

Do not be fooled by cheap imitation toggle hooks that are made from castings.

Sterling Toggle Hooks

We take great care and pride in our manufacturing process to ensure our customers are getting the highest quality toggle hooks.
Our Toggle Hooks go though special procedures for maximum strength and a long product life.
Toggle hooks are also known as die fixings, die catches, die locking, die attache, die fixture and die befestigungs stueck.

All sizes are stocked.

Standard Size - Used with honeycomb chases with a thickness of .668" - .759" (17mm -19.28mm)
Low Height Size - Used with honeycomb chases with a thickness of .540" - .668" (13.71mm -17mm)

Standard Hooks	Low Height Hooks	Description
		Number 0 Toggle Hooks Narrow Margin Hook is used when less than 1/8" (3mm) margin is required Standard:  Part #100-100 Low Height: Part #300-350
		Number 1 Toggle Hooks Standard Register Hook can be used most of the time Standard:  Part #100-101 Low Height: Part #300-351
		Number 2 Toggle Hooks Register Hook - has a jaw width slightly larger than the No.1 hook, it's our second most popular hook Standard:  Part #100-102 Low Height: Part #300-352
		Number 3 Toggle Hooks The No.3 is the same size as the No.1 hook except that the jaw thickness overall height is approximately .040" (1mm) smaller Standard:  Part #100-103
		Number 3E Toggle Hooks Extended Jaw Register - This hook has a jaw length that is in between our No.2 and No.4 hook Standard:    Part #100-104 Low Height: Part #300-354
		Number 4 Toggle Hooks Extra Extended Hook - used for locking up dies on honeycomb bases that do not use our standard hole pattern, such as a heated honeycomb base. Standard:    Part #100-105 Low Height: Part #300-355
		Toggle Hook Bodies Only Standard # 0:  Part #100-112  |Low Height # 0: Part #300-356 Standard # 1:  Part #100-113  |Low Height # 1: Part #300-357 Standard # 2:  Part #100-114  |Low Height # 2: Part #300-358 Standard # 3:  Part #100-115  |N/A Standard #3E: Part #100-116  |Low Height #3E: Part #300-359 Standard # 4:  Part #100-117  |Low Height # 4: Part #300-360
		Toggle Hook Assembly These parts can be used as replacements, they fit both standard and low height hooks A: Back Latch :     Part #100-107 B: Pin :                 Part #200-202 C: Bottom Latch : Part #100-106 D: Toggle Screw : Part #100-108 (Fits all size hooks except #0) E: Toggle Screw : Part #300-313 (Fits only #0 hooks)